Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

RF ELEMENTS UltraDish TP 400

For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
RF ELEMENTS UltraDish TP 400 (ULD-TP-400)

RF ELEMENTS UltraDish TP 400

Varenr.:
ULD-TP-400
  • Hastighed 0Mbps
  • Type Antenne
Beskrivelse

High Gain Directional Antennas
UltraDishTM TP Antennas are high-gain directional parabolic antennas with a lossless TwistPortTM connector. The antennas are highly directional and have suppressed side lobes for ultimate performance.

Beam Performance
UltraDishTM TP antennas have suppressed side lobe radiation that reduces interference and enables installation in areas with high noise levels. The gain of UltraDishTM TP Antennas is achieved by focusing the signal delivered via the TwistPortTM waveguide.

TwistPortTM Connector
TwistPortTM connector is a quick-locking virtually lossless waveguide port that connects the radio with the antenna. The TwistPortTM connector is our design and sets a new standard for outdoor wireless equipment in terms of performance, scalability, ease of use and deployment simplicity.

Easy Connection
TwistPortTM is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure, the connection of the radio to the antenna is brilliantly simple - “twist and lock” - and can be done with one hand!

Lossless
TwistPortTM connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause significant signal loss. In comparison to widely used coaxial cables and connectors, the loss on TwistPortTM is almost unmeasurable.

Cross-Platform Compatibility
UltraDishTM TP Antennas can be used with any radio with a TwistPortTM interface or with a variety of third-party radios connected through a TwistPortTM Adaptor.

Innovative Mount
UltraDishTM TP Antennas features a new innovative mounting system. The mount is separated from the antenna which makes the antenna installation and adjustment easy and quick.

Step 1: Bracket Installation
First install the bracket on the pole. Two sets of pole screws for different pole diameters are included.
The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.

Step 2: Antenna Adjustment
Simply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.
Only one tool is needed for the entire installation.

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.