Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

ARCTIC COOLING Alpine 12 95W CPU Cooler for Intel socket

Forsiden Tilbehør Køling ARCTIC COOLING Alpine 12 95W CPU Cooler for Intel socket
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
ARCTIC COOLING Alpine 12 95W CPU Cooler for Intel socket (ACALP00027A)

ARCTIC COOLING Alpine 12 95W CPU Cooler for Intel socket

Varenr.:
ACALP00027A
EAN:
4895213701419
  • Brugt areal Processor
  • Fan diameter 9.2cm
Beskrivelse

Alpine 12


Compact Intel CPU-Cooler

Top-Notch Price-Performance Ratio Thanks to its radial heat sink and good fan design, the Alpine 12 offers a lot of performance at a very low price point. In internal tests leveled to 28 dB(A), the cooling performance of the Alpine 12 exceeded the competition, in some cases by more than 10°C

Improved Cooling Performance
by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

Wide RPM Range The Alpine 12 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.

Lower Power Consumption & Minimum Vibration The new Alpine 12 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.

High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

Easy and Tool-free Installation Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.


Specifications:

Heatsink:
  • Radial Heatsink
Material:
  • Aluminium
Diameter:
  • 92 mm
Fan Speed:
  • 150 - 2.000 RPM (Controlled by RPWM)
Bearing:
  • Fluid Dynamic Bearing
Noise Level:
  • 0.3 Sone (@ 2.000 RPM)
Current/Voltage:
  • 0.06 A / 12 V

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.